Skip to content

Try it here

Hook rate calculator: hook rate and hold rate for video ads

Paste four numbers from Ads Manager to get hook rate, hold rate, and what you paid for each viewer you kept. Meta has no hook rate column, so every agency builds its own, and their benchmarks disagree. Below the calculator, each benchmark shows its source and the formula behind it.

By Drizzle team

Hook rate and hold rate calculator

Calculate hook rate (3-second video plays ÷ impressions), hold rate (ThruPlays ÷ 3-second plays), and the cost of each from one ad report.

The two formulas

Hook rate = 3-second video plays ÷ impressions × 100. Meta counts a 3-second play as "the number of times your video plays for at least 3 seconds, or for nearly its total length if it's shorter than 3 seconds." It counts one play per impression and excludes replays (Meta video metrics). Some teams call the same number thumb-stop rate.

Hold rate = ThruPlays ÷ 3-second video plays × 100. A ThruPlay is a play to completion or for at least 15 seconds (Meta ThruPlay). Hold rate tells you what share of the people your opening stopped kept watching.

Ads Manager has neither column. Add them under Columns, Customize columns, Custom metrics, using the formulas above, so every ad in the account is measured the same way.

Hook rate benchmarks, and how much to trust them

Only two published sources state a large dataset. Both put the typical Meta hook rate in the mid-20s. The 30–40% "good" bands quoted widely are practitioner opinion. They may still be useful targets, but no published data backs them.

Published hook rate and hold rate benchmarks, checked November 9, 2026
SourceDateHook rateHold rateBasis
Billo, H1 2026 reportAug 6, 2026Average 25.44%; by industry 21.32% to 28.79%Not reported88,329 Meta sales ads, Jan–Jun 2026, over 1,000 impressions each, $122M spend
Benly, 2026 benchmarksMar 25, 2026Median 28% across Meta (Feed 26%, Reels 31%); top quarter 37%+; TikTok median 33%Top 10%: Meta 22%, TikTok 28%Claims 12,347 ads from 842 accounts, Q1 2026; denominator not stated
AdSights, via JetfuelAug 20, 2026Feed 18–28% (median ~23%); Reels 24–36% (median ~30%)15s ÷ 3s plays: Feed median ~18%, Reels ~23%Secondhand; original dataset not published
Taylor SicardJul 2026Under 25% cut; 30–40% good; 40%+ eliteUnder 15% cut; ~25% good; 35%+ elitePractitioner judgment, stated as such
VaizleJan 19, 202620–25% working range; 30%+ topThruPlays ÷ 3s: 40–50%No stated method
Motion / Runneth blog2026Under 25% needs work; 25–35% solid; 35%+ strong40–50% average (page also says 25%+)No stated method
Hook rate is 3-second plays ÷ impressions unless noted. Motion’s large 2026 Creative Benchmarks report covers hit rate only, not hook or hold rate.

Why hold rate benchmarks disagree

Hold rate figures range from 18% to 50% because sources divide by different things:

  • ThruPlays ÷ 3-second plays (this calculator): Motion's glossary, Vaizle. Short ads push it up, because a completed 8-second view is a ThruPlay.
  • 15-second plays ÷ 3-second plays: the same number for ads longer than 15 seconds, and lower for short ads. The data AdSights reported via Jetfuel uses this: a Meta feed median near 18% and Reels near 23%.
  • ThruPlays ÷ impressions: Jetfuel warns this gives "a completely different (and much smaller) number." The calculator reports it separately as ThruPlays per impression.

When you compare your hold rate with a published one, check its denominator and the ad length first.

TikTok uses different windows

TikTok Ads Manager has no 3-second play and no ThruPlay. It reports 2-second video views, 6-second video views and views at 25/50/75/100% (TikTok video play metrics). A TikTok 6-second view also counts anyone who engaged within the first six seconds, so it isn't a pure watch-time measure.

Most TikTok guides calculate hook rate as 2-second views ÷ impressions. A two-second window reads higher than Meta's three seconds, so don't hold TikTok ads to Meta benchmarks, or the reverse. To use this calculator for TikTok, enter 2-second views as the plays and 6-second views as the hold count, and compare only with other TikTok ads.

What the combination tells you

  • Low hook, healthy hold: the people who stop like the ad, but too few stop. Test new first seconds and keep the rest of the edit.
  • High hook, low hold: the opening promises something the next seconds don't deliver. Bring the product or payoff forward.
  • High hook and hold, weak click-through: attention is fine. Look at the offer, the call to action and the landing page.
  • Both low: reconsider the concept, not the edit.

Hook and hold diagnose a creative. They don't replace cost per purchase or ROAS as the result you optimize for. A loud opening can stop people who were never going to buy.

Read the number before you act on it

  • Wait for volume. Billo excluded ads under 1,000 impressions from its dataset, and Taylor Sicard calls hook reads on about $200 of spend "mostly noise."
  • Compare within a placement. Benly's data puts Instagram Reels about five points above Facebook Feed. An account-wide average blends them.
  • Compare within a length band for hold rate, since ThruPlay changes meaning at 15 seconds.
  • Expect seasonal dips. Benly reports lower hook rates in Q4 and around Black Friday, when feeds are crowded.
  • Your own history is the better baseline. Compare an ad with your account's recent median for the same placement before you compare it with anyone's benchmark.

Fixing a weak hook

Change only the first two to three seconds, and keep the offer, product shots and length the same, so the test isolates the opening. Draft openings with the AI video hook generator, and read about hook fatigue before deciding a winning hook has stopped working. In Drizzle you can generate several product-led openings from the same product photo and approve each still before paying for motion. Put the variants into a creative test with enough budget per variant, which the ad testing budget calculator helps size.

Definitions and sources

Related definitions: hook rate, thumb-stop rate and three-second view rate. For CPM, CTR and ROAS from the same report, use the ad metrics calculator.

Checked November 9, 2026. Platform definitions: Meta video metrics, Meta ThruPlay optimization, TikTok video play metrics. Benchmarks: Billo H1 2026, Benly 2026, Jetfuel citing AdSights, Taylor Sicard, Vaizle, Motion / Runneth. Neither Meta nor TikTok publishes hook rate benchmarks. The calculator runs in your browser and does not send your numbers anywhere.

Frequently asked questions

How do you calculate hook rate?

Divide 3-second video plays by impressions and multiply by 100. 5,000 three-second plays from 20,000 impressions is a 25% hook rate. On TikTok, most advertisers use 2-second video views instead.

What is a good hook rate?

The largest published dataset, Billo's 88,329 Meta ads from H1 2026, found an average of 25.44%, ranging from about 21% to 29% by industry. Benly reports a 28% median across Meta placements, with the top quarter at 37% or more. The widely quoted 30–40% "good" range is practitioner opinion, not measured data.

How do you calculate hold rate?

This calculator uses ThruPlays ÷ 3-second video plays × 100. Some sources use 15-second plays ÷ 3-second plays, or ThruPlays ÷ impressions, which give different numbers. Say which one you use when you share results.

Does Meta Ads Manager show hook rate?

No. There is no native hook rate or hold rate column. Create them as custom metrics from 3-second video plays, ThruPlays and impressions.

Is hook rate the same as thumb-stop rate?

Usually, yes. Both normally mean 3-second plays ÷ impressions on Meta, but some teams use a two-second window for thumb-stop rate. Check the event before comparing reports.

Keep exploring

Put your next idea in motion.

Bring a product photo. Drizzle helps you make the creative.

Start creating